Application
- Can screen both loose diamonds and various jewellery designs to verify that they are natural
- Ideal for multiple workplaces including diamond/jewellery manufacturers, diamond wholesalers, large retailers and gemmological laboratories
- Can test large quantities of melee and larger jewellery pieces that can be laid out on the screening tray
- Suitable for bangles, tennis bracelets and eternity bands using the rotational accessories
Benefits
- Fully automated screening process, very little training required
- Screening speeds x10 faster than SynthDetect
- Timings: Full tray scan – 5 minutes, bangle scan 10 seconds and full rotational ring scan in 6 seconds
- NATURAL, SYNTHETIC and REFER classification
- Low referral rates, ~1% natural diamonds referred for further testing
- Can test a wide variety of diamonds and jewellery
- Results automatically generated into a report format
- Can view any ‘refer’ results in the ‘advanced’ mode – ability to image the fluorescence and phosphorescence and make your own manual measurements.
Features and Specifications
- Colour range: D-J (lower colours may result in higher referral rates)
- All cuts can be tested
- Size range: 0.001 to 10cts
- Necklaces, Rings, Earrings, Bracelets, Bangles, Tennis Bracelets, Brooches, Pendants and loose diamonds all tested
- Accessories include: 21cm diameter circular tray, various bangle, tennis bracelet and ring holders.
- SD2 dimensions: 52 cm (W) x 34 cm (D) x 55 cm (H)
- SD2 weight: 21 kg
- Remote automatic software updates
- One-year parts and service warranty
Price
- SynthDetectTM2: $25,000 USD
- To order, please contact us on [email protected] or use the form below
- We ship worldwide from our production facility in the UK
Learn more about the SynthDetect™ 2 and its capabilities
Have a question? Contact us by filling the form below.
Learn more about the SynthDetect™ 2 and its capabilities
Have a question? Contact us by filling the form below.
More Products
Support
Support for Diamond Verification Instruments
FAQs
Have a question about the SynthDetect? You may find your answer below.
There are a small number of natural diamonds that give luminescence characteristics that overlap with those from laboratory-grown diamonds. Any ‘refers’ would need further testing.
SynthDetect will classify non-diamond as ‘Refer’. Further tests are required to confirm a stone’s identity in this case.
This will result in an increased referral rate (i.e. more natural diamonds will show ‘refer’). SynthDetect is failsafe and will not pass a laboratory-grown diamond even if it is outside of the colour range specifications (D-J).
A powered USB hub can be safely used with the instrument. A non-powered hub can cause the instrument not to function correctly and in extreme cases can cause damage.
A4 size, 210mm × 297mm.
The FOV is 17 x 17mm. This limitation is due to the illumination light source. Using the Y adjustment on the unit, this extends to a scanning area of 55 x 17mm.
No, at present pieces requiring rotation must still use the standard SynthDetect lower module.
This is an operator-based task requiring the removal of only four screws. Without the fixing, it is possible that the connection between the two modules will be compromised, resulting in the illumination not performing.
