Application
- Screens the smallest diamond sizes to ensure no synthetic diamonds are in your natural diamond parcels
- Ideal for a jewellery/watch manufacturing/production environment
Benefits
- Screens out all laboratory-grown diamonds and simulants
- <3% natural diamonds are referred for further testing
- Reduces the amount of time required to screen small melee diamonds
- Fully integrated unit
- Automatically measures and dispenses, no user interpretation required
- Exportable screening reports
Features and Specifications
- 0.001–0.003ct size range (0.6–0.9mm diameter)
- Round brilliant cuts, loose diamonds
- Colourless to near-colourless
- Screens 2200 diamonds/hr
- Hopper capacity 200ct
- On-board humidifier for optimal screening
- Dispensed into one of the four results bins: pass, refer, lab-grown, non-diamond
Learn more about the AMSMicro and its capabilities
Learn more about the AMSMicro and its capabilities
More Products
Support
Support for Diamond Verification Instruments
FAQs
To eliminate any risk of diamonds sticking together they should be clean and free of any grease.
To ensure that all the melee loaded into the instrument have been screened and dispensed, parcels should be weighed before and after screening. This checks that no diamonds have got stuck in the system – possibly due to grease or static. Owing to the size of the melee, we recommend a balance that can weigh to 5dp if possible, or at least have an accuracy so that you can ensure not even one stone is left in the machine.
It is recommended that the AMSMicro calibration is checked every 30 days. A calibration disc is supplied with each AMSMicro machine. The calibration disc should be stored in a safe place.
The calibration operation is simple and on-screen instructions are displayed on the AMSMicro touch screen that will guide the user through the process.
